Change all PrintMessage to PrintLog (#33)

Author: adrianinsaval

Init.py

@@ -37,12 +37,12 @@ def setup_sentry():
 
     enabled = params.GetBool("Enable", True)
     if not enabled:
-        FreeCAD.Console.PrintMessage(
+        FreeCAD.Console.PrintLog(
             "Sentry initializing, but FreeCAD Telemetry sending is disabled: no data will be transmitted\n"
         )
         dsn = None
     else:
-        FreeCAD.Console.PrintMessage("Sentry initializing. FreeCAD Telemetry sending is active.\n")
+        FreeCAD.Console.PrintLog("Sentry initializing. FreeCAD Telemetry sending is active.\n")
     init_sentry(dsn=dsn)
 
 

InitGui.py

@@ -46,14 +46,12 @@ def setup_posthog():
     params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Telemetry")
     enabled = params.GetBool("Enable", True)
     if not enabled:
-        FreeCAD.Console.PrintMessage(
+        FreeCAD.Console.PrintLog(
             "PostHog initializing, but FreeCAD launch metrics sending is disabled: no data will be transmitted\n"
         )
         return
     else:
-        FreeCAD.Console.PrintMessage(
-            "PostHog initializing. FreeCAD launch metrics are being sent.\n"
-        )
+        FreeCAD.Console.PrintLog("PostHog initializing. FreeCAD launch metrics are being sent.\n")
     posthog_launch()
 
 
@@ -99,7 +97,7 @@ class Telemetry(Workbench):
 
     def __init__(self):
         super().__init__()
-        FreeCAD.Console.PrintMessage("Telemetry workbench loaded\n")
+        FreeCAD.Console.PrintLog("Telemetry workbench loaded\n")
 
     def Activated(self):
         """This function is executed when the workbench is activated"""

PosthogFC.py

@@ -70,25 +70,23 @@ def posthog_launch():
     addon = params.GetBool("SendAddonInformation", True)
     preferences = params.GetBool("SendPreferences", True)
 
-    FreeCAD.Console.PrintMessage("Telemetry Addon: Sending FreeCAD version data to Posthog\n")
+    FreeCAD.Console.PrintLog("Telemetry Addon: Sending FreeCAD version data to Posthog\n")
     posthog_fc_startup()
     posthog_fc_version()
     if system:
-        FreeCAD.Console.PrintMessage("Telemetry Addon: Sending FreeCAD system info to Posthog\n")
+        FreeCAD.Console.PrintLog("Telemetry Addon: Sending FreeCAD system info to Posthog\n")
         posthog_system_info()
     if addon:
-        FreeCAD.Console.PrintMessage("Telemetry Addon: Sending FreeCAD addon info to Posthog\n")
+        FreeCAD.Console.PrintLog("Telemetry Addon: Sending FreeCAD addon info to Posthog\n")
         posthog_addon_list()
     if preferences:
-        FreeCAD.Console.PrintMessage(
-            "Telemetry Addon: Sending FreeCAD preferences info to Posthog\n"
-        )
+        FreeCAD.Console.PrintLog("Telemetry Addon: Sending FreeCAD preferences info to Posthog\n")
         posthog_preferences()
     params.SetString("LastSendTime", datetime.now().isoformat())
 
 
 def handle_error(exception: Exception, _payload: Optional[Dict[str, Any]]) -> None:
-    FreeCAD.Console.PrintMessage(
+    FreeCAD.Console.PrintLog(
         "Telemetry Addon: Error connecting, no telemetry will be sent for this session\n"
     )
     FreeCAD.Console.PrintLog(str(exception) + "\n")
@@ -317,6 +315,6 @@ def posthog_shutdown():
     params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Telemetry")
     enabled = params.GetBool("Enabled", True)
     if enabled and posthog:
-        FreeCAD.Console.PrintMessage("Telemetry Addon: Sending FreeCAD shutdown info to Posthog\n")
+        FreeCAD.Console.PrintLog("Telemetry Addon: Sending FreeCAD shutdown info to Posthog\n")
         posthog_fc_shutdown()
         posthog.flush()

Sentry.py

@@ -33,11 +33,11 @@
 
 
 def before_send(event, _):
-    FreeCAD.Console.PrintMessage(f"Sending event to Sentry: {event}\n")
+    FreeCAD.Console.PrintLog(f"Sending event to Sentry: {event}\n")
     params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Telemetry")
     enabled = params.GetBool("Enable", False)
     if not enabled:
-        FreeCAD.Console.PrintMessage("  -> Send blocked because Telemetry is disabled\n")
+        FreeCAD.Console.PrintLog("  -> Send blocked because Telemetry is disabled\n")
         return None  # Drop the event
     return event
 
@@ -49,8 +49,8 @@ def init_sentry(dsn):
     release = FreeCAD.Version()
 
     if release[6] and release[6] != "main":
-        FreeCAD.Console.PrintMessage("FreeCAD Telemetry addon disabled: not on main branch\n")
-        FreeCAD.Console.PrintMessage(f"FreeCAD branch: {release[6]}\n")
+        FreeCAD.Console.PrintLog("FreeCAD Telemetry addon disabled: not on main branch\n")
+        FreeCAD.Console.PrintLog(f"FreeCAD branch: {release[6]}\n")
         return
 
     major = release[0]
@@ -80,5 +80,5 @@ def init_sentry(dsn):
 
 
 def close_sentry_session():
-    FreeCAD.Console.PrintMessage("Closing Sentry session\n")
+    FreeCAD.Console.PrintLog("Closing Sentry session\n")
     sentry_sdk.get_global_scope().start_session()

TelemetryPreferences.py

@@ -109,17 +109,17 @@ def _enable_check_state_changed(self, check_state):
     #        params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Telemetry")
     #        params.SetString("DSN", text)
     #        init_sentry(text)
-    #        FreeCAD.Console.PrintMessage(f"Telemetry is now being sent to {text}\n")
+    #        FreeCAD.Console.PrintLog(f"Telemetry is now being sent to {text}\n")
     #        self._reset_sentry()
 
     #    def _reset_sentry(self):
     #        params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Telemetry")
     #        if params.GetBool("Enable", True):
     #            dsn = params.GetString("DSN", "unset")
-    #            FreeCAD.Console.PrintMessage(f"Resetting Sentry to use DSN {dsn}\n")
+    #            FreeCAD.Console.PrintLog(f"Resetting Sentry to use DSN {dsn}\n")
     #            init_sentry(dsn=dsn)
     #        else:
-    #            FreeCAD.Console.PrintMessage(f"Deactivating Sentry (setting dsn=None)\n")
+    #            FreeCAD.Console.PrintLog(f"Deactivating Sentry (setting dsn=None)\n")
     #            init_sentry(dsn=None)
 
     def _data_removal_clicked(self):
@@ -163,11 +163,11 @@ def _remove_user_data() -> (bool, str):
                         "Telemetry", "Your user data was successfully removed from the database."
                     )
                 else:
-                    FreeCAD.Console.PrintMessage(
+                    FreeCAD.Console.PrintLog(
                         f"Received a {response.status} response to our request\n"
                     )
                     FreeCAD.Console.PrintError(response.read() + "\n")
                     return False, error_string
         except urllib.request.HTTPError as e:
-            FreeCAD.Console.PrintMessage(str(e) + "\n")
+            FreeCAD.Console.PrintLog(str(e) + "\n")
             return False, error_string